SBS-Modified Prefabricated Anti-Slip Roll Membrane — ≥4 mm · Color-Coated · −10°C Rated · Rapid-Install

Product Overview

Prefabricated Anti-Slip Roll Material is an SBS-modified bituminous waterproof roll membrane engineered for outdoor hard-surface applications. It combines a petroleum bitumen base with SBS elastomer, high-viscosity additives, and polyurethane to deliver a durable, high-traction surface that is waterproof, abrasion-resistant, and rapidly installable.

The surface is finished with a high-gloss color coating that dramatically boosts pavement abrasion resistance while providing a highly aesthetic finish. The coating is available in standard colors (iron red, iron yellow, standard green, peacock blue, dark grey) or any custom RAL/Pantone color to meet specific design requirements.

Unlike traditional poured-in-place surfacing, this prefabricated roll installs rapidly — no lengthy road closure, no hot-melt equipment, and traffic can resume immediately after installation. It is the ideal solution for pathways, playgrounds, scenic routes, and other outdoor applications where minimizing downtime is critical.

Quick Facts

Brand: Ahonesty
Place of Origin: China
Material Base: SBS-Modified Petroleum Bitumen + Polyurethane
Thickness: ≥4 mm
Width × Length: 100 cm × 10 m (10 m² per roll)
Softening Point: ≥80°C
Low-Temp Flexibility: No cracks at −10°C
Tensile Strength: ≥400 N/50mm (both directions)
Water Impermeability: Impermeable @ 0.2 MPa / 30 min
Surface Finish: High-gloss color coating, custom colors available
Installation: Rapid lay-down, no hot-melt, immediate traffic
MOQ: 100 rolls
Payment Terms: T/T, L/C, PayPal, Western Union

Key Features

1. SBS-Modified Bitumen Matrix
Petroleum bitumen modified with SBS elastomer and high-viscosity additives provides exceptional flexibility, crack-bridging capability, and long-term durability across temperature extremes.
2. High-Gloss Color Coating
Factory-applied polyurethane-enhanced surface coating with custom RAL/Pantone color matching. Iron red, iron yellow, standard green, peacock blue, and dark grey are standard; other colors available to order.
3. Superior Abrasion Resistance
Wet wheel abrasion loss ≤100 g/m² after compaction — significantly outperforming conventional rolled surfacing. High-gloss coating withstands friction and wear, extending service life.
4. Rapid Installation — Zero Downtime
Prefabricated roll format eliminates on-site mixing, hot-melt equipment, and curing time. Once laid, traffic resumes immediately — ideal for roads where prolonged closure is not feasible.
5. Excellent Anti-Slip Properties
Engineered surface texture provides reliable friction under wet and dry conditions, meeting pedestrian safety requirements for playgrounds, footpaths, and scenic routes.
6. Strong Multi-Substrate Bonding
Bond strength ≥60 N/50mm. Compatible with asphalt, concrete, marble, and steel plate substrates — no special primer required in most applications.
7. Waterproof & Weather-Resistant
Impermeable at 0.2 MPa for 30 minutes. Combined with ≥80°C softening point and −10°C low-temperature flexibility, delivers all-season performance without cracking or bleeding.

Technical Specifications

Typical Applications

• Low-traffic urban roads and residential streets
  
• Landscaped pathways and permeable landscape walkways
  
• Public squares and plazas
  
• Footpaths and pedestrian walkways
  
• Playgrounds and recreational surfaces
  
• Parks, scenic routes, and tourist pathways
  

FAQ

Q:What is the minimum order quantity (MOQ)?
A:MOQ is 100 rolls (1,000 m²). For trial orders, we can accommodate 50 rolls. Contact us for smaller quantity options.
Q:Can I get a free sample before placing a bulk order?
A:Yes, we offer free A4-size samples (approx. 20 × 30 cm) for evaluation. Freight is collect. Larger samples can be arranged on request.
Q:What colors are available for the surface coating?
A:Standard colors: iron red, iron yellow, standard green, national standard peacock blue, and dark grey. Custom colors are available — please provide RAL, Pantone, or physical color sample reference.
Q:What is the typical lead time?
A:Standard lead time is 10–15 working days for orders up to 500 rolls. Larger quantities and custom color orders may require 20–25 working days.
Q:Do you offer OEM / private-label packaging?
A:Yes. Minimum 500 rolls for OEM/private-label with custom logo, packaging design, and color branding. We can also provide neutral packaging.
Q:How is the roll material installed?
A:Installation is simple: unroll onto the prepared substrate, apply a compatible bituminous adhesive or mechanical fasteners as required, and traffic can resume immediately. No hot-melt equipment or curing time is needed.
Q:What packaging is used for export?
A:Standard export packaging: each roll is wrapped in PE film, then placed in a woven bag or carton. Palletized and stretch-wrapped for container loading. Custom packaging available for OEM orders.